5306-01-167-2403 BOLT,CLOSE TOLERANCE Index 5305-01-167-2405 SCREW,CLOSE TOLERANCE

National Stock Number:
5306-01-167-2404

Federal Supply Class:
5306

National Item Identification Number:
011672404

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.


Manufacturer Information:
121491-16-4880539SPS TECHNOLOGIES, LLC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER4.051 INCHES MINIMUM AND 4.097 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH4.208 INCHES MINIMUM AND 4.244 INCHES MAXIMUM
GRIP DIAMETER0.9982 INCHES MINIMUM AND 0.9991 INCHES MAXIMUM
GRIP LENGTH2.976 INCHES MINIMUM AND 2.992 INCHES MAXIMUM
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.501 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
HEAD STYLEHEXAGON
LOCKING FEATUREDETENT RING GRIP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP E4340 OVERALL
MINIMUM TENSILE STRENGTH74000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER1.000 INCHES
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS1.427 INCHES MINIMUM AND 1.440 INCHES MAXIMUM
SURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH63.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.885 INCHES MINIMUM AND 1.196 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH12


Click here to Register for Free 30-day Trial