FASTENER LENGTH | 0.392 INCHES MINIMUM AND 0.422 INCHES MAXIMUM |
GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
GRIP LENGTH | 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
HEAD HEIGHT | 0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
HEAD STYLE | DISHED HEXAGON |
HOLE CONFIGURATION STYLE | HEXAGON CORNERS |
HOLE DIAMETER | 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
HOLE QUANTITY | 3 |
HOLE TYPE | DRILLED |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
NOMINAL THREAD DIAMETER | 0.190 INCHES |
WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
SPECIFICATION/STANDARD DATA | 80205-NAS6603 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
SURFACE FINISH | 32.0 MICROINCHES GRIP |
SURFACE FINISH | 32.0 MICROINCHES THREADS |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD LENGTH | 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
THREAD SERIES DESIGNATOR | UNJF |
THREAD QUANTITY PER INCH | 32 |