|
|
National Stock Number: 5306-01-167-0300
Federal Supply Class: 5306
National Item Identification Number: 011670300
Description: BOLT,CLOSE TOLERANCE
Detail: An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
LD111-0026 | 06725 | SPS TECHNOLOGIES, LLC | LD111-0026 | 73197 | HI-SHEAR CORPORATION | LD111-0026 | 80539 | SPS TECHNOLOGIES, LLC | LD111-0026 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | LD111-0026-4431 | 43999 | THE BOEING COMPANY |
|
Techincal Specification:
FASTENER LENGTH | 2.972 INCHES MINIMUM AND 3.002 INCHES MAXIMUM | GRIP DIAMETER | 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM | GRIP LENGTH | 1.928 INCHES MINIMUM AND 1.948 INCHES MAXIMUM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | HEAD HEIGHT | 0.468 INCHES NOMINAL | HEAD STYLE | DOUBLE HEXAGON | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | MATERIAL | STEEL COMP XM-13 OVERALL | NOMINAL THREAD DIAMETER | 0.875 INCHES | WIDTH BETWEEN FLATS | 1.239 INCHES MINIMUM AND 1.252 INCHES MAXIMUM | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | SURFACE TREATMENT | PASSIVATE OVERALL | THREAD CLASS | 3A | THREAD DIRECTION | RIGHT-HAND | THREAD LENGTH | 1.024 INCHES MINIMUM AND 1.074 INCHES MAXIMUM | THREAD SERIES DESIGNATOR | UNJF | THREAD QUANTITY PER INCH | 14 |
|
|