5306-01-167-0296 BOLT,SHEAR Index 5305-01-167-0298 SCREW,CAP,HEXAGON HEAD

National Stock Number:
5306-01-167-0297

Federal Supply Class:
5306

National Item Identification Number:
011670297

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
NAS6704D380205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.410 INCHES MINIMUM AND 0.460 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH0.598 INCHES MINIMUM AND 0.628 INCHES MAXIMUM
GRIP DIAMETER0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD HEIGHT0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALIRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA80205-NAS6704 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH28


Click here to Register for Free 30-day Trial