5305-01-167-0293 SETSCREW Index 5306-01-167-0295 BOLT,SHEAR

National Stock Number:
5306-01-167-0294

Federal Supply Class:
5306

National Item Identification Number:
011670294

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
MS21134-0603280205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS21134-0603296906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
EXTENDED WASHER DIAMETER0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.029 INCHES MINIMUM AND 0.059 INCHES MAXIMUM
FASTENER LENGTH2.604 INCHES MINIMUM AND 2.634 INCHES MAXIMUM
GRIP DIAMETER0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.263 INCHES MINIMUM AND 0.303 INCHES MAXIMUM
HEAD MINOR DIAMETER0.423 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD STYLESPLINE EXTENDED WASHER
MATERIALSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.375 INCHES
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.594 INCHES MINIMUM AND 0.644 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH24


Click here to Register for Free 30-day Trial