5306-01-162-9709 BOLT,SHEAR Index 5305-01-162-9711 SCREW,CAP,SOCKET HEAD

National Stock Number:
5306-01-162-9710

Federal Supply Class:
5306

National Item Identification Number:
011629710

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
76683-6-1056878SPS TECHNOLOGIES, LLC
76683S-6-1056878SPS TECHNOLOGIES, LLC
80489-6-1056878SPS TECHNOLOGIES, LLC
80489-6-1080539SPS TECHNOLOGIES, LLC


Techincal Specification:
FASTENER LENGTH1.415 INCHES MINIMUM AND 1.435 INCHES MAXIMUM
GRIP LENGTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
GRIP DIAMETER0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
HEAD HEIGHT0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALNICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.375 INCHES
WIDTH BETWEEN FLATS0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.780 INCHES MINIMUM AND 0.820 INCHES MAXIMUM
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNS


Click here to Register for Free 30-day Trial