5306-01-077-9727 BOLT,SHEAR Index 5306-01-077-9729 BOLT,SHEAR

National Stock Number:
5306-01-077-9728

Federal Supply Class:
5306

National Item Identification Number:
010779728

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
MS21297-1404706725SPS TECHNOLOGIES, LLC
MS21297-1404717446HUCK INTERNATIONAL, INC
MS21297-1404727624SPS TECHNOLOGIES LLC
MS21297-1404780205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS21297-1404796906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS21297-1404797928HUCK INTL INC


Techincal Specification:
EXTENDED WASHER THICKNESS0.116 INCHES MINIMUM AND 0.136 INCHES MAXIMUM
EXTENDED WASHER DIAMETER1.615 INCHES MINIMUM AND 1.625 INCHES MAXIMUM
FASTENER LENGTH4.285 INCHES MINIMUM AND 4.315 INCHES MAXIMUM
GRIP DIAMETER0.8730 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH2.928 INCHES MINIMUM AND 2.948 INCHES MAXIMUM
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.554 INCHES MINIMUM AND 0.594 INCHES MAXIMUM
HEAD MINOR DIAMETER1.034 INCHES MINIMUM AND 1.042 INCHES MAXIMUM
HEAD STYLESPLINE EXTENDED WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.875 INCHES
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-8837 TY 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3A
THREAD LENGTH1.337 INCHES MINIMUM AND 1.387 INCHES MAXIMUM
THREAD QUANTITY PER INCH14
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us