5306-01-059-1945 BOLT,SHEAR Index 5306-01-059-1947 BOLT,SHEAR

National Stock Number:
5306-01-059-1946

Federal Supply Class:
5306

National Item Identification Number:
010591946

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
MS21296-0601406725SPS TECHNOLOGIES, LLC
MS21296-0601417446HUCK INTERNATIONAL, INC
MS21296-0601427624SPS TECHNOLOGIES LLC
MS21296-0601480205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS21296-0601496906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS21296-0601497928HUCK INTL INC


Techincal Specification:
EXTENDED WASHER DIAMETER0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
FASTENER LENGTH1.594 INCHES MINIMUM AND 1.624 INCHES MAXIMUM
GRIP DIAMETER0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HARDNESS RATING51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.263 INCHES MINIMUM AND 0.303 INCHES MAXIMUM
HEAD MINOR DIAMETER0.448 INCHES MINIMUM AND 0.455 INCHES MAXIMUM
HEAD STYLESPLINE EXTENDED WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH260000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.375 INCHES
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-8837 TY 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.709 INCHES MINIMUM AND 0.759 INCHES MAXIMUM
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us