5306-01-058-8423 BOLT,CLOSE TOLERANCE Index 5306-01-058-8425 BOLT,SHEAR

National Stock Number:
5306-01-058-8424

Federal Supply Class:
5306

National Item Identification Number:
010588424

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
5306PL14973879009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
MS21297-0703406725SPS TECHNOLOGIES, LLC
MS21297-0703417446HUCK INTERNATIONAL, INC
MS21297-0703427624SPS TECHNOLOGIES LLC
MS21297-0703480205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS21297-0703496906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS21297-0703497928HUCK INTL INC
VFK101G7-03406710VALLEY-TODECO, INC.


Techincal Specification:
EXTENDED WASHER DIAMETER0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FASTENER LENGTH2.888 INCHES MINIMUM AND 2.918 INCHES MAXIMUM
GRIP DIAMETER0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
HEAD MINOR DIAMETER0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
HEAD STYLESPLINE EXTENDED WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.438 INCHES
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMILC--8837 TY 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.753 INCHES MINIMUM AND 0.803 INCHES MAXIMUM
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us