|
|
|
National Stock Number:
5306-01-058-3897
Federal Supply Class:
5306
National Item Identification Number:
010583897
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 5306PL1497356 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | MS21297-06023 | 06725 | SPS TECHNOLOGIES, LLC | | MS21297-06023 | 17446 | HUCK INTERNATIONAL, INC | | MS21297-06023 | 27624 | SPS TECHNOLOGIES LLC | | MS21297-06023 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS21297-06023 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS21297-06023 | 97928 | HUCK INTL INC | | VFK101G6-023 | 06710 | VALLEY-TODECO, INC. |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM | | FASTENER LENGTH | 2.097 INCHES MINIMUM AND 2.127 INCHES MAXIMUM | | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM | | GRIP LENGTH | 1.428 INCHES MINIMUM AND 1.448 INCHES MAXIMUM | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.327 INCHES MINIMUM AND 0.347 INCHES MAXIMUM | | HEAD MINOR DIAMETER | 0.423 INCHES MINIMUM AND 0.438 INCHES MAXIMUM | | HEAD STYLE | SPLINE EXTENDED WASHER | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.649 INCHES MINIMUM AND 0.699 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|