5306-01-058-0729, BOLT,SHEAR

National Stock Number:
5306-01-058-0729

Federal Supply Class:
5306

National Item Identification Number:
010580729

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

5306PL1497343	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
MS21296-07011	06725	SPS TECHNOLOGIES, LLC
MS21296-07011	17446	HUCK INTERNATIONAL, INC
MS21296-07011	27624	SPS TECHNOLOGIES LLC
MS21296-07011	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS21296-07011	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS21296-07011	97928	HUCK INTL INC

Techincal Specification:

EXTENDED WASHER DIAMETER	0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FASTENER LENGTH	1.521 INCHES MINIMUM AND 1.551 INCHES MAXIMUM
GRIP DIAMETER	0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH	0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HARDNESS RATING	51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
HEAD STYLE	SPLINE EXTENDED WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	260000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.438 INCHES
WIDTH BETWEEN FLATS	0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-8837 TY 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.823 INCHES MINIMUM AND 0.873 INCHES MAXIMUM
THREAD QUANTITY PER INCH	20
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial