5306-01-057-5989, BOLT,SHEAR

National Stock Number:
5306-01-057-5989

Federal Supply Class:
5306

National Item Identification Number:
010575989

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

5306PL1497315	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
MS21297-05010	06725	SPS TECHNOLOGIES, LLC
MS21297-05010	17446	HUCK INTERNATIONAL, INC
MS21297-05010	27624	SPS TECHNOLOGIES LLC
MS21297-05010	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS21297-05010	97928	HUCK INTL INC
VFK101G5-010	06710	VALLEY-TODECO, INC.

Techincal Specification:

EXTENDED WASHER DIAMETER	0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH	1.214 INCHES MINIMUM AND 1.244 INCHES MAXIMUM
GRIP DIAMETER	0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.247 INCHES MINIMUM AND 0.287 INCHES MAXIMUM
HEAD MINOR DIAMETER	0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLE	SPLINE EXTENDED WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.312 INCHES
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-8837 TY 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.579 INCHES MINIMUM AND 0.629 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial