5306-01-057-3753, BOLT,SHEAR

National Stock Number:
5306-01-057-3753

Federal Supply Class:
5306

National Item Identification Number:
010573753

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

5306PL1497270	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
MS21297-04017	06725	SPS TECHNOLOGIES, LLC
MS21297-04017	17446	HUCK INTERNATIONAL, INC
MS21297-04017	27624	SPS TECHNOLOGIES LLC
MS21297-04017	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS21297-04017	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS21297-04017	97928	HUCK INTL INC
VFK101G4-017	06710	VALLEY-TODECO, INC.

Techincal Specification:

EXTENDED WASHER DIAMETER	0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH	1.557 INCHES MINIMUM AND 1.587 INCHES MAXIMUM
GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH	1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.194 INCHES MINIMUM AND 0.234 INCHES MAXIMUM
HEAD MINOR DIAMETER	0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD STYLE	SPLINE EXTENDED WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-8837 TY 2CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.485 INCHES MINIMUM AND 0.535 INCHES MAXIMUM
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial