|
|
|
National Stock Number:
5306-01-057-3044
Federal Supply Class:
5306
National Item Identification Number:
010573044
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 5306PL0894744 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5306PL1773628 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | MS21297-07013 | 06725 | SPS TECHNOLOGIES, LLC | | MS21297-07013 | 17446 | HUCK INTERNATIONAL, INC | | MS21297-07013 | 27624 | SPS TECHNOLOGIES LLC | | MS21297-07013 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS21297-07013 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS21297-07013 | 97928 | HUCK INTL INC | | VFK101G7-013 | 06710 | VALLEY-TODECO, INC. |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM | | FASTENER LENGTH | 1.575 INCHES MINIMUM AND 1.605 INCHES MAXIMUM | | GRIP DIAMETER | 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM | | GRIP LENGTH | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.383 INCHES MINIMUM AND 0.403 INCHES MAXIMUM | | HEAD MINOR DIAMETER | 0.485 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | HEAD STYLE | SPLINE EXTENDED WASHER | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.437 INCHES | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.753 INCHES MINIMUM AND 0.803 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNJF |
|
|