DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.668 INCHES NOMINAL FIRST HOLE |
CONCENTRIC HOLE DEPTH | 1.190 INCHES NOMINAL |
CONCENTRIC HOLE DIAMETER | 0.375 INCHES NOMINAL |
CRITICALITY CODE JUSTIFICATION | AAVH |
FASTENER LENGTH | 1.830 INCHES NOMINAL |
HEAD DIAMETER | 1.250 INCHES NOMINAL |
HEAD HEIGHT | 0.120 INCHES NOMINAL |
HEAD STYLE | ROUND W/WRENCH FLATS |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
MATERIAL | STEEL OVERALL |
MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
NOMINAL THREAD DIAMETER | 0.375 INCHES |
SHOULDER LENGTH | 1.310 INCHES MINIMUM AND 1.320 INCHES MAXIMUM |
SHANK UNTHREADED HOLE DIAMETER | 0.111 INCHES NOMINAL FIRST HOLE |
SHOULDER DIAMETER | 0.7485 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM |
WIDTH BETWEEN FLATS | 1.053 INCHES MINIMUM AND 1.066 INCHES MAXIMUM |
STYLE DESIGNATOR | CONCENTRIC HOLE UNTHREADED |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | LCP 1067,FSCM 36659 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
SURFACE TREATMENT | CADMIUM OVERALL |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD LENGTH | 0.427 INCHES MINIMUM AND 0.466 INCHES MAXIMUM |
THREAD SERIES DESIGNATOR | UNJF |
THREAD QUANTITY PER INCH | 24 |