|
|
|
National Stock Number:
5306-01-031-1446
Federal Supply Class:
5306
National Item Identification Number:
010311446
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| BACB30NF5H27 | 06710 | VALLEY-TODECO, INC. | | BACB30NF5H27 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30NF5H27 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30NF5H27 | 17446 | HUCK INTERNATIONAL, INC | | BACB30NF5H27 | 17943 | FEDERAL MANUFACTURING CORP | | BACB30NF5H27 | 27624 | SPS TECHNOLOGIES LLC | | BACB30NF5H27 | 56878 | SPS TECHNOLOGIES, LLC | | BACB30NF5H27 | 80539 | SPS TECHNOLOGIES, LLC | | BACB30NF5H27 | 81205 | THE BOEING COMPANY | | BACB30NF5H27 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30NF5H27 | 97928 | HUCK INTL INC | | BACB30NF5H27 | 98524 | MONOGRAM AEROSPACE FASTENERS, INC |
|
Techincal Specification:
| FASTENER LENGTH | 2.126 INCHES MINIMUM AND 2.156 INCHES MAXIMUM | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | GRIP LENGTH | 1.677 INCHES MINIMUM AND 1.697 INCHES MAXIMUM | | HEAD HEIGHT | 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM | | HEAD STYLE | UNDERCUT HEXAGON | | HOLE CONFIGURATION STYLE | HEXAGON CORNERS | | HOLE DIAMETER | 0.070 INCHES NOMINAL | | HOLE QUANTITY | 3 | | HOLE TYPE | DRILLED | | MATERIAL | STEEL COMP 4340 OR STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | Q-P-416,TY 2,CL 3 FED SPEC 13TH TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.429 INCHES MINIMUM AND 0.479 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|