5306-01-030-4899, BOLT,SHEAR

National Stock Number:
5306-01-030-4899

Federal Supply Class:
5306

National Item Identification Number:
010304899

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

76639-12-66

56878

SPS TECHNOLOGIES, LLC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	4.522 INCHES MINIMUM AND 4.554 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	4.650 INCHES MINIMUM AND 4.697 INCHES MAXIMUM
GRIP DIAMETER	0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM
GRIP LENGTH	4.115 INCHES MINIMUM AND 4.135 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.400 INCHES NOMINAL
HEAD STYLE	DOUBLE HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.750 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.515 INCHES MINIMUM AND 0.582 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	16

Click here to Register for Free 30-day Trial