5306-01-017-2574, BOLT,SHEAR

National Stock Number:
5306-01-017-2574

Federal Supply Class:
5306

National Item Identification Number:
010172574

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

NAS1306-118DH

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	7.746 INCHES MINIMUM AND 7.775 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	7.938 INCHES MINIMUM AND 7.968 INCHES MAXIMUM
GRIP DIAMETER	0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH	7.365 INCHES MINIMUM AND 7.385 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
HOLE DIAMETER	0.070 INCHES NOMINAL
HOLE CONFIGURATION STYLE	HEXAGON CORNERS
HOLE QUANTITY	3
HOLE TYPE	DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.375 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.118 INCHES MINIMUM AND 0.207 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.553 INCHES MINIMUM AND 0.603 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	24

Click here to Register for Free 30-day Trial