5305-01-017-2568 SCREW,DRIVE Index 5306-01-017-2570 BOLT,SHEAR

National Stock Number:
5306-01-017-2569

Federal Supply Class:
5306

National Item Identification Number:
010172569

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
MS21250-1604206725SPS TECHNOLOGIES, LLC
MS21250-1604206950HOWMET GLOBAL FASTENING SYSTEMS INC
MS21250-1604217446HUCK INTERNATIONAL, INC
MS21250-1604227624SPS TECHNOLOGIES LLC
MS21250-1604256878SPS TECHNOLOGIES, LLC
MS21250-1604280205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS21250-1604292215HOWMET GLOBAL FASTENING SYSTEMS INC
MS21250-1604296906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS21250-1604297928HUCK INTL INC
VFK10G-1604206710VALLEY-TODECO, INC.


Techincal Specification:
EXTENDED WASHER DIAMETER1.615 INCHES MINIMUM AND 1.625 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.222 INCHES NOMINAL
FASTENER LENGTH4.124 INCHES NOMINAL
GRIP DIAMETER0.9980 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM
GRIP LENGTH2.615 INCHES MINIMUM AND 2.635 INCHES MAXIMUM
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.923 INCHES NOMINAL
HEAD STYLEDOUBLE HEXAGON W/HOLE
MATERIALSTEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER1.000 INCHES
WIDTH BETWEEN FLATS1.062 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.479 INCHES MINIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH12


Click here to Register for Free 30-day Trial