5306-01-014-1191 BOLT,SHEAR Index 5305-01-014-1195 SCREW,SHOULDER

National Stock Number:
5306-01-014-1194

Federal Supply Class:
5306

National Item Identification Number:
010141194

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
C699-10-2506725SPS TECHNOLOGIES, LLC
C699-10-2580539SPS TECHNOLOGIES, LLC
C699-10-2581755LOCKHEED MARTIN CORPORATION
C699-10-2592215HOWMET GLOBAL FASTENING SYSTEMS INC
EWSB22-10-2580539SPS TECHNOLOGIES, LLC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.059 INCHES MINIMUM AND 0.091 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH2.178 INCHES MINIMUM AND 2.225 INCHES MAXIMUM
GRIP DIAMETER0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.350 INCHES NOMINAL
HEAD STYLEDOUBLE HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONSPS-M-107 FSCM 56878 MFR REF 1ST MATERIAL RESPONSE OVERALL
MATERIALSTEEL OR STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.625 INCHES
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES NOMINAL FIRST HOLE
SPECIFICATION/STANDARD DATA80539-EWSB22 MANUFACTURERS STANDARD
WIDTH BETWEEN FLATS0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.606 INCHES MINIMUM AND 0.673 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH18


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us