|
|
|
National Stock Number:
5306-00-995-5433
Federal Supply Class:
5306
National Item Identification Number:
009955433
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| 364784 | 4MJR3 | PARTS LIFE INC | | 364784 | 77445 | RTX CORPORATION | | 364784 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | EXTENDED WASHER DIAMETER | 0.510 INCHES NOMINAL | | EXTENDED WASHER THICKNESS | 0.080 INCHES NOMINAL | | FASTENER LENGTH | 1.010 INCHES NOMINAL | | FEATURES PROVIDED | FINISHED HEAD | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.385 INCHES NOMINAL | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | HOLE CONFIGURATION STYLE | HEXAGON LONGITUDINAL HOLE | | HOLE DIAMETER | 0.062 INCHES NOMINAL | | HOLE QUANTITY | 4 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 601 OVERALL | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SPECIAL FEATURES | CRITICAL TO WPN SYS PERFORMANCE. FAILURE COULD CAUSE CATASTROPHIC OR CRITICAL FAILURE RESULTING IN THE LOSS OF OR SERIOUS DAMAGE TO THE AIRCRAFT OR WPN SYS OR AN UNCOMMANDED ENGINE SHUTDOWN | | WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.927 INCHES MINIMUM | | THREAD SERIES DESIGNATOR | UNS | | THREAD QUANTITY PER INCH | 24 |
|
|