5306-00-969-7793, BOLT,EXTERNALLY RELIEVED BODY

National Stock Number:
5306-00-969-7793

Federal Supply Class:
5306

National Item Identification Number:
009697793

Description:
BOLT,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.

Manufacturer Information:

284048	11449	TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP
284048	77445	RTX CORPORATION
284048	80539	SPS TECHNOLOGIES, LLC

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.380 INCHES MINIMUM AND 0.420 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER	2.800 INCHES MINIMUM AND 2.840 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	1.420 INCHES MINIMUM AND 1.460 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER	1.680 INCHES MINIMUM AND 1.720 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	4
FASTENER LENGTH	3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.246 INCHES MINIMUM AND 0.249 INCHES MAXIMUM
FOURTH DIAMETER FROM HEAD	0.176 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD STYLE	HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER	0.070 INCHES NOMINAL
HOLE QUANTITY	6
HOLE TYPE	DRILLED
MATERIAL	STEEL COMP 8740 OVERALL
NOMINAL THREAD DIAMETER	0.250 INCHES
SECOND DIAMETER FROM HEAD	0.176 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THIRD DIAMETER FROM HEAD	0.246 INCHES MINIMUM AND 0.249 INCHES MAXIMUM
THREAD LENGTH	0.650 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
THREAD QUANTITY PER INCH	20
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial