6110-00-839-5532 PANEL,POWER BUS,CIRCUIT BREAKER Index 5905-00-839-5534 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5306-00-839-5533

Federal Supply Class:
5306

National Item Identification Number:
008395533

Description:
BOLT,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.


Manufacturer Information:
38525877445RTX CORPORATION


Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER3.585 INCHES MINIMUM AND 3.625 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER2.235 INCHES MINIMUM AND 2.255 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER2.325 INCHES NOMINAL
EXTENDED WASHER THICKNESS0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
EXTENDED WASHER DIAMETER0.459 INCHES MINIMUM AND 0.469 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY3
FASTENER LENGTH4.185 INCHES MINIMUM AND 4.205 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
HEAD HEIGHT0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 7477 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
NOMINAL THREAD DIAMETER0.3125 INCHES
SECOND DIAMETER FROM HEAD0.490 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
THREAD DIRECTIONRIGHT-HAND
THIRD DIAMETER FROM HEAD0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD CLASS3A
THREAD LENGTH0.580 INCHES MINIMUM AND 0.600 INCHES MAXIMUM
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us