5305-00-810-5883 SCREW,MACHINE Index 5910-00-810-5885 CAPACITOR,FIXED,PLASTIC DIELECTR

National Stock Number:
5306-00-810-5884

Federal Supply Class:
5306

National Item Identification Number:
008105884

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
10114385A486GNIMIKKEISTOKESKUS NCB FINLAND
NAS674V7D80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.682 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH0.863 INCHES NOMINAL
GRIP DIAMETER0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH0.438 INCHES NOMINAL
HEAD HEIGHT0.125 INCHES NOMINAL
HEAD STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONNAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALTITANIUM ALLOY UNS R54520 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES NOMINAL FIRST HOLE
WIDTH BETWEEN FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.425 INCHES MINIMUM
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH28


Click here to Register for Free 30-day Trial