5935-00-810-3768 CONNECTOR,RECEPTACLE,ELECTRICAL Index 2815-00-810-3771 SILENCER,AIR

National Stock Number:
5306-00-810-3769

Federal Supply Class:
5306

National Item Identification Number:
008103769

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.


Manufacturer Information:
AN180H7388044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER7.296 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH7.500 INCHES MINIMUM AND 7.547 INCHES MAXIMUM
GRIP DIAMETER0.6234 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH6.546 INCHES MINIMUM AND 6.578 INCHES MAXIMUM
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM
HEAD STYLEHEXAGON
HOLE DIAMETER0.070 INCHES NOMINAL
HOLE CONFIGURATION STYLEHEXAGON FLATS
HOLE QUANTITY1
HOLE TYPEDRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4140 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.625 INCHES
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES NOMINAL FIRST HOLE
WIDTH BETWEEN FLATS0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.922 INCHES MINIMUM AND 1.001 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH18


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us