DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 7.007 INCHES NOMINAL FIRST HOLE |
FASTENER LENGTH | 7.396 INCHES NOMINAL |
GRIP DIAMETER | 1.2475 INCHES MINIMUM AND 1.2490 INCHES MAXIMUM |
GRIP LENGTH | 5.750 INCHES NOMINAL |
HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
HEAD HEIGHT | 0.625 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
HEAD STYLE | DISHED HEXAGON |
HOLE DIAMETER | 0.070 INCHES NOMINAL |
HOLE CONFIGURATION STYLE | HEXAGON CORNERS |
HOLE QUANTITY | 3 |
HOLE TYPE | DRILLED |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
MATERIAL | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
NOMINAL THREAD DIAMETER | 1.250 INCHES |
SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE |
SPECIFICATION/STANDARD DATA | 80205-NAS1320 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
WIDTH BETWEEN FLATS | 1.801 INCHES MINIMUM AND 1.815 INCHES MAXIMUM |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD LENGTH | 1.646 INCHES MINIMUM |
THREAD SERIES DESIGNATOR | UNJF |
THREAD QUANTITY PER INCH | 12 |