DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.918 INCHES MINIMUM AND 2.968 INCHES MAXIMUM FIRST HOLE |
FASTENER LENGTH | 3.125 INCHES MINIMUM AND 3.155 INCHES MAXIMUM |
GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
GRIP LENGTH | 2.552 INCHES MINIMUM AND 2.572 INCHES MAXIMUM |
HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
HEAD HEIGHT | 0.188 INCHES MINIMUM AND 0.302 INCHES MAXIMUM |
HEAD STYLE | HEXAGON |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
MATERIAL | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
NOMINAL THREAD DIAMETER | 0.375 INCHES |
SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE |
SPECIFICATION/STANDARD DATA | 80205-NAS1306 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY1 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
SURFACE TREATMENT | CADMIUM OVERALL |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD LENGTH | 0.553 INCHES MINIMUM AND 0.603 INCHES MAXIMUM |
THREAD SERIES DESIGNATOR | UNJF |
THREAD QUANTITY PER INCH | 24 |