EXTENDED WASHER DIAMETER | 1.220 INCHES MINIMUM AND 1.230 INCHES MAXIMUM |
EXTENDED WASHER THICKNESS | 0.168 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
FASTENER LENGTH | 8.930 INCHES MINIMUM AND 8.970 INCHES MAXIMUM |
HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
HEAD HEIGHT | 0.798 INCHES MINIMUM AND 0.818 INCHES MAXIMUM |
HEAD STYLE | DOUBLE HEXAGON W/HOLE |
HOLE DIAMETER | 0.075 INCHES NOMINAL |
HOLE CONFIGURATION STYLE | HEXAGON FLATS |
HOLE QUANTITY | 2 |
HOLE TYPE | DRILLED |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
MATERIAL | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
NOMINAL THREAD DIAMETER | 0.625 INCHES |
SHOULDER LENGTH | 5.310 INCHES NOMINAL FIRST SHOULDER |
SHOULDER SHAPE | ROUND FIRST SHOULDER |
SHOULDER DIAMETER | 0.748 INCHES MINIMUM AND 0.749 INCHES MAXIMUM FIRST SHOULDER |
WIDTH BETWEEN FLATS | 0.808 INCHES MINIMUM AND 0.817 INCHES MAXIMUM |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
SURFACE TREATMENT | CADMIUM OVERALL |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD LENGTH | 1.000 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
THREAD SERIES DESIGNATOR | UNF |
THREAD QUANTITY PER INCH | 18 |