DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.730 INCHES NOMINAL FIRST HOLE |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 1.540 INCHES MINIMUM AND 1.550 INCHES MAXIMUM |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | 1.603 INCHES MINIMUM AND 1.613 INCHES MAXIMUM |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 3 |
FASTENER LENGTH | 1.880 INCHES MINIMUM AND 1.910 INCHES MAXIMUM |
FIRST DIAMETER FROM HEAD | 0.336 INCHES MINIMUM AND 0.346 INCHES MAXIMUM |
HEAD HEIGHT | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
HEAD STYLE | HEXAGON |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050,F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
MATERIAL | STEEL COMP 8630 OVERALL |
MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH |
NOMINAL THREAD DIAMETER | 0.250 INCHES |
SECOND DIAMETER FROM HEAD | 0.3732 INCHES MINIMUM AND 0.3743 INCHES MAXIMUM |
SHANK UNTHREADED HOLE DIAMETER | 0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE |
WIDTH BETWEEN FLATS | 0.546 INCHES MINIMUM AND 0.548 INCHES MAXIMUM |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 496,TY 2 FSCM 36659 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
SURFACE TREATMENT | CHROMIUM OVERALL |
THIRD DIAMETER FROM HEAD | 0.186 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD LENGTH | 0.393 INCHES MINIMUM AND 0.433 INCHES MAXIMUM |
THREAD SERIES DESIGNATOR | UNF |
THREAD QUANTITY PER INCH | 28 |