| CRITICALITY CODE JUSTIFICATION | FEAT |
| EXTENDED WASHER DIAMETER | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| EXTENDED WASHER THICKNESS | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| FASTENER LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| FEATURES PROVIDED | FINISHED HEAD |
| HARDNESS RATING | 24.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD HEIGHT | 0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| HEAD STYLE | DOUBLE HEXAGON W/HOLE |
| HOLE CONFIGURATION STYLE | DOUBLE HEXAGON LONGITUDINAL HOLE |
| HOLE DIAMETER | 0.062 INCHES NOMINAL |
| HOLE QUANTITY | 4 |
| HOLE TYPE | DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | IRON ALLOY 660 OVERALL |
| MINIMUM YIELD STRENGTH | 85000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| NONSTANDARD THREAD PITCH DIAMETER | +0.2213 TO 0.2238 INCHES |
| PRECIOUS MATERIAL | SILVER |
| SPECIAL FEATURES | CRITICAL FEATURES SUCH AS FIT, FORM AND FUNCTION. FAILURE COULD CAUSE LOSSOF OR SERIOUS DAMAGE TO THE AIRCRAFT OR WEAPON SYSTEM PERFORMANCE AND OPERATION IAW TF33 ENGINEERING |
| WIDTH BETWEEN FLATS | 0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| SURFACE TREATMENT | SILVER OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.481 INCHES MINIMUM AND 0.552 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES DESIGNATOR | UNF |