5306-00-780-6387, BOLT,SHEAR

National Stock Number:
5306-00-780-6387

Federal Supply Class:
5306

National Item Identification Number:
007806387

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

A02L2006-2	77272	THE BOEING COMPANY
A02L2006-2	81205	THE BOEING COMPANY

Techincal Specification:

EXTENDED WASHER DIAMETER	0.928 INCHES MINIMUM AND 0.938 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.123 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
FASTENER LENGTH	6.563 INCHES MINIMUM AND 6.593 INCHES MAXIMUM
GRIP DIAMETER	0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH	5.740 INCHES MINIMUM AND 5.760 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.547 INCHES MINIMUM AND 0.567 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATION	SPS-M-107 FSCM 81205 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.562 INCHES
SPECIAL FEATURES	EXTENDED WASHER HEAD MACHINED FLAT,0.360 IN FROM CENTER LINE OF SHANK
WIDTH BETWEEN FLATS	0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
TEST DATA DOCUMENT	81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.803 INCHES MINIMUM AND 0.853 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	18

Click here to Register for Free 30-day Trial