1560-00-722-8271 DUCT ASSEMBLY,BLEED AIR Index 1560-00-722-8273 DUCT,BLEED AIR

National Stock Number:
5306-00-722-8272

Federal Supply Class:
5306

National Item Identification Number:
007228272

Description:
BOLT,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.


Manufacturer Information:
38803656878SPS TECHNOLOGIES, LLC
38803677445RTX CORPORATION
38803692215HOWMET GLOBAL FASTENING SYSTEMS INC
38803693907TEXTRON FASTENING SYSTEMS DBA DECORAH OPERATIONS TFS


Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER1.340 INCHES MINIMUM AND 1.360 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER1.840 INCHES MINIMUM AND 1.860 INCHES MAXIMUM
EXTENDED WASHER DIAMETER0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY3
EXTENDED WASHER THICKNESS0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
FASTENER LENGTH2.552 INCHES MINIMUM AND 2.572 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD0.246 INCHES MINIMUM AND 0.247 INCHES MAXIMUM
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
MINIMUM YIELD STRENGTH140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
NONSTANDARD THREAD PITCH DIAMETER+0.2213 TO 0.2238 INCHES
SECOND DIAMETER FROM HEAD0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
SURFACE TREATMENTPASSIVATE OVERALL
THREAD DIRECTIONRIGHT-HAND
THIRD DIAMETER FROM HEAD0.246 INCHES MINIMUM AND 0.247 INCHES MAXIMUM
THREAD LENGTH0.712 INCHES MINIMUM
THREAD QUANTITY PER INCH28
THREAD SERIES DESIGNATORUNF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us