|
|
|
National Stock Number:
5306-00-660-3211
Federal Supply Class:
5306
National Item Identification Number:
006603211
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 200103MPC109 | 93236 | DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE | | 5064B | 0AT62 | SIEMENS ENERGY, INC. | | 5064B | 830Q4 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 5064B | 93236 | DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.547 INCHES NOMINAL FIRST HOLE | | FASTENER LENGTH | 1.625 INCHES NOMINAL | | GRIP LENGTH | 0.625 INCHES NOMINAL | | GRIP DIAMETER | 0.3100 INCHES MINIMUM AND 0.3110 INCHES MAXIMUM | | HEAD HEIGHT | 0.172 INCHES NOMINAL | | HEAD STYLE | HEXAGON | | MATERIAL | COPPER ALLOY 464 OVERALL | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.078 INCHES NOMINAL FIRST HOLE | | SPECIAL FEATURES | FURNISHED W/ONE HEX SLOTTED NUT | | WIDTH BETWEEN FLATS | 0.594 INCHES NOMINAL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.000 INCHES MINIMUM | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNC |
|
|