|
|
|
National Stock Number:
5306-00-655-9962
Federal Supply Class:
5306
National Item Identification Number:
006559962
Description:
BOLT,EYE
Detail:
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also BOLT, HOOK. Excludes CONNECTOR, ROD END.
|
Manufacturer Information:
| AN45C4 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | AN45C4 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 0.421 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM CENTER OF EYE TO SHANK END | 1.188 INCHES NOMINAL | | EYE INSIDE DIAMETER | 0.313 INCHES MINIMUM AND 0.316 INCHES MAXIMUM | | EYE OUTSIDE WIDTH | 0.688 INCHES NOMINAL | | EYE STOCK THICKNESS | 0.188 INCHES NOMINAL | | OVERALL LENGTH | 1.579 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-770 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES NOMINAL FIRST HOLE | | SHANK LENGTH | 0.578 INCHES MINIMUM AND 0.625 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.688 INCHES NOMINAL | | SHOULDER THICKNESS | 0.094 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND, CLOSED W/SHOULDER | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.532 INCHES MINIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNF |
|
|