| CRITICALITY CODE JUSTIFICATION | FEAT |
| EXTENDED WASHER DIAMETER | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| EXTENDED WASHER THICKNESS | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| FASTENER LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| FEATURES PROVIDED | FINISHED HEAD |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD HEIGHT | 0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| HEAD STYLE | DOUBLE HEXAGON EXTENDED WASHER |
| HOLE CONFIGURATION STYLE | DOUBLE HEXAGON LONGITUDINAL HOLE |
| HOLE DIAMETER | 0.065 INCHES NOMINAL |
| HOLE QUANTITY | 4 |
| HOLE TYPE | DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| NONSTANDARD THREAD PITCH DIAMETER | +0.2213 TO 0.2238 INCHES |
| PRECIOUS MATERIAL | SILVER |
| SPECIAL FEATURES | FORM,FIT,FUNCTION |
| WIDTH BETWEEN FLATS | 0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| SURFACE FINISH | 32.0 MICROINCHES THREADS |
| SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE THREADS |
| SURFACE TREATMENT | SILVER THREADS |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.669 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES DESIGNATOR | UNF |