5310-00-638-6126 WASHER,SPLIT Index 5305-00-638-6136 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5306-00-638-6131

Federal Supply Class:
5306

National Item Identification Number:
006386131

Description:
BOLT,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.


Manufacturer Information:
726514-398897LOCKHEED MARTIN CORP


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.800 INCHES NOMINAL FIRST HOLE
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.140 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY1
FASTENER LENGTH0.900 INCHES NOMINAL
FIRST DIAMETER FROM HEAD0.196 INCHES NOMINAL
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.120 INCHES NOMINAL
HEAD STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 8630 OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.064 INCHES NOMINAL FIRST HOLE
WIDTH BETWEEN FLATS0.625 INCHES NOMINAL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.610 INCHES MINIMUM
THREAD QUANTITY PER INCH28
THREAD SERIES DESIGNATORUNF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us