|
|
|
National Stock Number:
5306-00-637-8661
Federal Supply Class:
5306
National Item Identification Number:
006378661
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| CV15-910619-1 | 80378 | TRIUMPH AEROSTRUCTURES, LLC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.644 INCHES MINIMUM AND 1.676 INCHES MAXIMUM FIRST HOLE | | GRIP LENGTH | 1.422 INCHES MINIMUM AND 1.454 INCHES MAXIMUM | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SHANK UNTHREADED HOLE DIAMETER | 0.1065 INCHES NOMINAL FIRST HOLE | | WIDTH BETWEEN FLATS | 0.552 INCHES MINIMUM AND 0.564 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CVA5-5,FSCM 80378 MFR REF ALL TREATMENT RESPONSES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CVA5-2,FSCM 80378 MFR REF ALL TREATMENT RESPONSES HEAD | | SURFACE TREATMENT | CADMIUM OR CHROMIUM HEAD | | SURFACE TREATMENT | CADMIUM OR CHROMIUM THREADS | | TEST DATA DOCUMENT | 81349-MIL-I-6870 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.359 INCHES MINIMUM AND 0.374 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNF |
|
|