|
|
National Stock Number: 5306-00-533-8774
Federal Supply Class: 5306
National Item Identification Number: 005338774
Description: BOLT,SHEAR
Detail: A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
204-011-463-003 | 97499 | BELL TEXTRON INC | 204-011-463-107 | 97499 | BELL TEXTRON INC | 204-011-463-3 | 97499 | BELL TEXTRON INC | 78538-5-20 | 56878 | SPS TECHNOLOGIES, LLC | AIC1463-5-20 | 06725 | SPS TECHNOLOGIES, LLC | PBF1177-5-20 | 27624 | SPS TECHNOLOGIES LLC |
|
Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.466 INCHES MINIMUM AND 1.498 INCHES MAXIMUM FIRST HOLE | FASTENER LENGTH | 1.593 INCHES MINIMUM AND 1.640 INCHES MAXIMUM | GRIP DIAMETER | 0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM | GRIP LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM | HARDNESS RATING | 51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL | HEAD HEIGHT | 0.140 INCHES MINIMUM AND 0.145 INCHES MAXIMUM | HEAD STYLE | DOUBLE HEXAGON | MATERIAL DOCUMENT AND CLASSIFICATION | SPS-M-107,STANDARD PRESSED STEEL CO MFR REF SINGLE MATERIAL RESPONSE OVERALL | MATERIAL | STEEL OVERALL | MINIMUM TENSILE STRENGTH | 260000 POUNDS PER SQUARE INCH | NOMINAL THREAD DIAMETER | 0.312 INCHES | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES NOMINAL FIRST HOLE | WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM | SURFACE TREATMENT | CADMIUM OVERALL | THREAD CLASS | 3A | THREAD DIRECTION | RIGHT-HAND | THREAD LENGTH | 0.333 INCHES MINIMUM AND 0.400 INCHES MAXIMUM | THREAD QUANTITY PER INCH | 24 | THREAD SERIES DESIGNATOR | UNJF |
|
|