|
|
|
National Stock Number:
5306-00-528-5811
Federal Supply Class:
5306
National Item Identification Number:
005285811
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 3000T93P06 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | FASTENER LENGTH | 1.330 INCHES MINIMUM AND 1.350 INCHES MAXIMUM | | GRIP DIAMETER | 0.1889 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM | | GRIP LENGTH | 0.783 INCHES MINIMUM AND 0.843 INCHES MAXIMUM | | HARDNESS RATING | 29.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | WIDTH BETWEEN FLATS | 0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNJF |
|
|