5306-00-151-6955, BOLT,EXTERNALLY RELIEVED BODY

National Stock Number:
5306-00-151-6955

Federal Supply Class:
5306

National Item Identification Number:
001516955

Description:
BOLT,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.

Manufacturer Information:

6866165

73342

ALLISON TRANSMISSION INC

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER	3.815 INCHES MINIMUM AND 3.875 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	2.280 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	2.530 INCHES NOMINAL
EXTENDED WASHER DIAMETER	0.438 INCHES NOMINAL
EXTENDED WASHER THICKNESS	0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	3
FASTENER LENGTH	4.625 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.190 INCHES MINIMUM AND 0.195 INCHES MAXIMUM
HEAD HEIGHT	0.300 INCHES NOMINAL
HEAD STYLE	DOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
NOMINAL THREAD DIAMETER	0.250 INCHES
SECOND DIAMETER FROM HEAD	0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.313 INCHES NOMINAL
TEST DATA DOCUMENT	81343-AMS2645 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THIRD DIAMETER FROM HEAD	0.190 INCHES MINIMUM AND 0.195 INCHES MAXIMUM
THREAD LENGTH	0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial