5305-00-151-6882 SCREW,MACHINE Index 5305-00-151-6886 SCREW,ASSEMBLED WASHER

National Stock Number:
5306-00-151-6883

Federal Supply Class:
5306

National Item Identification Number:
001516883

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
5305001516883A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5305001516883SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
AIC220E5-1606725SPS TECHNOLOGIES, LLC
BACB30CW5-1681205THE BOEING COMPANY
BM5522-5-1617446HUCK INTERNATIONAL, INC
BM5522-5-1697928HUCK INTL INC
EWB22-5-1680539SPS TECHNOLOGIES, LLC
GB511H5-1626512NORTHROP GRUMMAN SYSTEMS CORPORATION
VS2003F5-1606950HOWMET GLOBAL FASTENING SYSTEMS INC
VS2003F5-1692215HOWMET GLOBAL FASTENING SYSTEMS INC


Techincal Specification:
EXTENDED WASHER THICKNESS0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
EXTENDED WASHER DIAMETER0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
FASTENER LENGTH1.578 INCHES MINIMUM AND 1.608 INCHES MAXIMUM
GRIP DIAMETER0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM THREADS
HEAD HEIGHT0.309 INCHES MINIMUM AND 0.329 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6485 FED SPEC 1ST MATERIAL RESPONSE OR AMS6487 FED SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP H11 OVERALL
PROPRIETARY CHARACTERISTICSPACS
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES
WIDTH BETWEEN FLATS0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.568 INCHES MINIMUM AND 0.618 INCHES MAXIMUM
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial