| DISTANCE FROM CENTER OF EYE TO SHANK END | 1.046 INCHES MINIMUM AND 1.077 INCHES MAXIMUM |
| EYE INSIDE DIAMETER | 0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| EYE OUTSIDE WIDTH | 0.421 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| EYE STOCK THICKNESS | 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| OVERALL LENGTH | 1.295 INCHES MINIMUM AND 1.327 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR SAE ASSN STD 6TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 7TH MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL OVERALL |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| SHANK LENGTH | 0.601 INCHES MINIMUM AND 0.688 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM |
| SHOULDER THICKNESS | 0.046 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| SPECIAL FEATURES | EYE COUNTERSINK 0.030 IN.BY 45 DEG BOTH SIDES |
| STYLE DESIGNATOR | ROUND, CLOSED W/SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.391 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNF |