5306-00-151-2325, BOLT,CLOSE TOLERANCE

National Stock Number:
5306-00-151-2325

Federal Supply Class:
5306

National Item Identification Number:
001512325

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Manufacturer Information:

AN176-17A	88044	AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
AN176H17	88044	AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.734 INCHES MINIMUM AND 1.766 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	1.938 INCHES MINIMUM AND 1.984 INCHES MAXIMUM
GRIP DIAMETER	0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM
GRIP LENGTH	1.297 INCHES MINIMUM AND 1.328 INCHES MAXIMUM
HARDNESS RATING	26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD STYLE	HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON FLATS
HOLE DIAMETER	0.070 INCHES NOMINAL
HOLE QUANTITY	1
HOLE TYPE	DRILLED
MATERIAL	STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.375 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	0.553 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
SURFACE FINISH	63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	63.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.609 INCHES MINIMUM AND 0.688 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial