|
|
|
National Stock Number:
5306-00-151-1182
Federal Supply Class:
5306
National Item Identification Number:
001511182
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| AN175H34 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.405 INCHES MINIMUM AND 3.437 INCHES MAXIMUM FIRST HOLE | | FASTENER LENGTH | 3.578 INCHES MINIMUM AND 3.656 INCHES MAXIMUM | | GRIP DIAMETER | 0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM | | GRIP LENGTH | 3.046 INCHES MINIMUM AND 3.078 INCHES MAXIMUM | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE DIAMETER | 0.070 INCHES NOMINAL | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4037 OR STEEL COMP 4130 OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE | | WIDTH BETWEEN FLATS | 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.500 INCHES MINIMUM AND 0.610 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNF |
|
|