5306-00-151-1124, BOLT,MACHINE

National Stock Number:
5306-00-151-1124

Federal Supply Class:
5306

National Item Identification Number:
001511124

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

AN4-51

88044

AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	4.984 INCHES MINIMUM AND 5.016 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	5.141 INCHES MINIMUM AND 5.188 INCHES MAXIMUM
FEATURES PROVIDED	FINISHED HEAD
GRIP LENGTH	4.672 INCHES MINIMUM AND 4.703 INCHES MAXIMUM
HARDNESS RATING	26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.086 INCHES NOMINAL FIRST HOLE
WIDTH BETWEEN FLATS	0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE,2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.438 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial