5306-00-151-0902, BOLT,CLOSE TOLERANCE

National Stock Number:
5306-00-151-0902

Federal Supply Class:
5306

National Item Identification Number:
001510902

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Manufacturer Information:

AN179H31	88044	AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
B6812	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	3.031 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH	3.281 INCHES NOMINAL
GRIP DIAMETER	0.5611 INCHES MINIMUM AND 0.5616 INCHES MAXIMUM
GRIP LENGTH	2.375 INCHES NOMINAL
HARDNESS RATING	26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
HEAD STYLE	HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON FLATS
HOLE DIAMETER	0.070 INCHES NOMINAL
HOLE TYPE	DRILLED
HOLE QUANTITY	1
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR AMS 6300 ASSN STD 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 6TH MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 4140 OVERALL
MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES NOMINAL FIRST HOLE
WIDTH BETWEEN FLATS	0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
SURFACE FINISH	125.0 MICROINCHES THREADS
SURFACE FINISH	250.0 MICROINCHES TOP OF HEAD
SURFACE FINISH	63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	63.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.906 INCHES MINIMUM
THREAD QUANTITY PER INCH	18
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial