|
|
|
National Stock Number:
5306-00-150-3532
Federal Supply Class:
5306
National Item Identification Number:
001503532
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| MS21250H10034 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 1.040 INCHES MINIMUM AND 1.050 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.150 INCHES NOMINAL | | FASTENER LENGTH | 3.044 INCHES NOMINAL | | GRIP DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | GRIP LENGTH | 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.618 INCHES NOMINAL | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE DIAMETER | 0.055 INCHES NOMINAL | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 4 | | MATERIAL | STEEL COMP 8740 OR STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 6150 OR STEEL COMP 4140 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | WIDTH BETWEEN FLATS | 0.679 INCHES MINIMUM AND 0.690 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.909 INCHES MINIMUM AND 0.929 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNJF |
|
|