|
|
|
National Stock Number:
5306-00-150-3358
Federal Supply Class:
5306
National Item Identification Number:
001503358
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| MS9111-06 | 0U583 | SAE INTERNATIONAL | | MS9111-06 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS9111-06 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 0.438 INCHES NOMINAL | | EXTENDED WASHER THICKNESS | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | FASTENER LENGTH | 0.875 INCHES NOMINAL | | GRIP LENGTH | 0.250 INCHES MINIMUM AND 0.331 INCHES MAXIMUM | | GRIP DIAMETER | 0.2494 INCHES MINIMUM AND 0.2499 INCHES MAXIMUM | | HEAD HEIGHT | 0.330 INCHES NOMINAL | | HEAD STYLE | DOUBLE HEXAGON EXTENDED WASHER | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | MINIMUM TENSILE STRENGTH | 130000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 85000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | WIDTH BETWEEN FLATS | 0.305 INCHES MINIMUM AND 0.313 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF |
|
|