5306-00-145-7061 BOLT,MACHINE Index 5305-00-145-7065 SCREW,MACHINE

National Stock Number:
5306-00-145-7062

Federal Supply Class:
5306

National Item Identification Number:
001457062

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
AN16-2088044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.953 INCHES MINIMUM AND 1.984 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH2.234 INCHES MINIMUM AND 2.281 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
GRIP LENGTH0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER1.000 INCHES
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS1.428 INCHES MINIMUM AND 1.441 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.343 INCHES MINIMUM AND 1.422 INCHES MAXIMUM
THREAD QUANTITY PER INCH14
THREAD SERIES DESIGNATORUNS


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us