5305-00-145-6898 SCREW,MACHINE Index 5305-00-145-6914 SCREW,MACHINE

National Stock Number:
5306-00-145-6910

Federal Supply Class:
5306

National Item Identification Number:
001456910

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
AN8DD2288044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
B681281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.905 INCHES MINIMUM AND 1.937 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH2.078 INCHES MINIMUM AND 2.125 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
HEAD HEIGHT0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIALALUMINUM ALLOY 3003 OR ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5454 OR ALUMINUM ALLOY 5456 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 OR ALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 7178 OR ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 2011 OR ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 2117 OR ALUMINUM ALLOY 5056 OR ALUMINUM ALLOY 6053 OVERALL
MINIMUM TENSILE STRENGTH62000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.500 INCHES
SHANK UNTHREADED HOLE DIAMETER0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENTANODIZE OR OXIDE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.750 INCHES MINIMUM AND 0.829 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH20


Click here to Register for Free 30-day Trial